Alben Industrial Engineers Private Limited

Aided by a team of qualified and skilled professionals, we are offering a huge gamut ofWaste Tyre Recycling Pyrolysis Plant that is obtainable in varied technical specifications. Offered plant is inspected by our quality managers on well-defined parameters. Provided plant is recognized in the market, owing to its hassle free installation, low maintenance cost and less power consumption. Besides, clients can buy this plant from us at nominal prices.

Product Description:

We are Manufacturer of the Waste Tyre Recycling Pyrolysis Plant, we provide all kind of Parts and sercive related to the Machine and its Equipments, which are of high grade quality raw materials. The Plant that we manufacture are long lasting and of very good Quality, at a very negotiable rate.
We manufacture the plant according to our customers requirement and need. As we consider our customer to be the KING. In the whole process of Pyrolysis the tyres are melted and decomposed through which the extracts are gethered, these are valuable i.e Pyrosol oil, Carbon Black Dust, Steel Wires and Gas.

Extracts are as follows:

• Capacity :- 8 ton/Day.
• Pyrolysis oil :- 40 to 45%
• Carbon black:- 30 to 35%
• Steel Wire:- 10 to 15% ( Depend on Type
• Pyrolysis Gas:- About 10 %1) First Product is Pyrosol Oil, The Oil Specification are as follows:

Sr.No. Specifications Units Test Results Standard Value

• Kinematic_Viscosity_At 40°C Cst 9.00 2.4– 15.7
• Acidity, Total Mgkoh/Gm 0.01 Nil
• Ash % By Wt 0.005 0.02
• Flash Point, Coc °C 40 66 Min.
• Water Content % By Wt Nil 1.0 Max.
• Pour Point °C 6 12 – 18
• Density At 27°C Gm/Cc 0.907 To Report
• Sediments % By Mass 0.02 0.10
• Total Sulphur % By Mass 0.65 1.80
• Copper Strip Corrosion Test For 3 Hrs At 100°C No Units 1b 1 Max
• Gross Calorific Value Kcal/Kg 10,200 Abv.10000

2) Second Product is CB: Carbon Black Specification:

• Total(Condition) Method Unit Specified Value Observed Value
• Ash Content ASTM D 1506 % – 9.44
• Pour Density ASTM D 1513 Kg/m3 – 244
• pH Value ASTM D 1512 – – 6.60
• Loss on Heating ASTM D 1509 % – 0.41
• Solvent Extractable ASTM D 4527 % – 7.60
• Iodine Adsorption IS 7498 gm / Kg – 81.14
• Surface Area by BET Method ASTM D 1993 m2 / gm – 27.51
• ICP Analysis
• Cu IRMRA/CHEM/ PPM – 11
• Fe SOP/08 954
• Mn 14

3) Third Product is Scrap Steel Wires Which is easily saleable in the market.
4) Forth product is Gas which is reused for firing the Plant for production

* Terms and conditions while Setting up the Plant can be discussed throught